On the gas-powered griddle units sold in Finland, the nozzle tips must be removed to achieve full power. The reason for this is the 30 mbar pressure used in Finland. The unit does work without this step, but full power is only achieved by removing the small nozzle tips.
The tip is loosened using a 6mm socket or a screwdriver handle with an interchangeable bit, such as a Torx or Phillips tip. It opens clockwise. Hardly any force is needed.
- 36'': 4 removed
- 28'' and 22'': 2 removed
- 17'': 1 removed
Here's what the removed tip looks like:
The nozzle consists of two parts. Never remove the rear one, i.e. both parts.
NOTE! On these models the nozzles have already been removed at the factory and this step is not needed:
- 1868DK - Blackstone griddle 36'' with AirFryer
- 1785DK - Blackstone griddle 28'' with AirFryer
- 2310DK - Blackstone griddle 36' Iron Forge Omnivore
- 2311DK - Blackstone griddle 28'' Iron Forge Omnivore
Feel free to contact us any time with further questions, and we'll be happy to help.